Open any property listing in Lahore, Islamabad or Rawalpindi and you’ll see plot sizes quoted in Marla and Kanal rather than square feet. Move the same search to Karachi and the ads suddenly switch to square yards. For anyone buying a plot, comparing a DHA or Bahria Town file, or simply trying to figure out how big “5 Marla” actually is, this mix of units is one of the most common sources of confusion in Pakistani real estate. The good news is that the conversions are fixed and easy to apply once you know the standard figures — and a wrong assumption here can mean over- or under-estimating a plot’s actual size by hundreds of square feet.

Why Pakistan Still Measures Land in Marla and Kanal

Marla and Kanal are land units inherited from British-era revenue records, and they remain the standard in Punjab and the Islamabad Capital Territory to this day. Housing societies such as DHA, Bahria Town, and most private schemes in Lahore, Islamabad, Rawalpindi, Faisalabad, and Multan price and advertise plots in Marla for smaller residential lots and Kanal for larger ones. Karachi and much of Sindh, by contrast, lean more heavily on square yards and square feet, which is why a buyer moving between cities often has to convert units just to compare two listings fairly.

The Standard Conversions You Need to Know

The figures below are the ones used across most of Pakistan’s current property listings, DHA and Bahria documentation, and this site’s own Marla to square feet converter:

So a “5 Marla” house — one of the most common residential plot sizes in Punjab — works out to roughly 1,361 square feet, and a “10 Marla” plot is about 2,722 square feet. A full Kanal, often used for larger bungalows in DHA and Bahria’s premium blocks, comes to 5,445 square feet, or just over an eighth of an acre.

Old Marla vs the Standard Used Today

If you’ve ever come across a conflicting figure — some older government and CDA (Islamabad) records use 225 square feet per Marla instead of 272.25 — that isn’t a mistake, it’s a genuine historical inconsistency. Revenue records from certain regions and older housing authority allotments were based on a smaller Marla, while most of Punjab, including Lahore and Faisalabad, and the vast majority of today’s private housing schemes use the 272.25 sq ft figure. When you’re verifying an old registry document or a decades-old allotment letter, it’s worth asking the housing authority or sub-registrar which measure was used for that specific record, since the two conventions can create a real difference of around 17% in calculated area for the same plot number.

Common Plot Sizes in DHA, Bahria Town and Other Societies

Most residential schemes in Punjab and Islamabad are laid out around a handful of standard sizes: 3.5 Marla and 5 Marla for smaller homes and row-house sections, 8 Marla and 10 Marla for mid-sized family houses, and 1 Kanal (20 Marla) or larger for premium plots and farmhouses. Commercial plots are frequently sized at 2 Marla, 4 Marla, or 8 Marla depending on the scheme’s master plan. In Karachi’s DHA and Clifton, by comparison, the same categories are usually advertised directly in square yards — a 240 square yard plot or a 500 square yard plot — without ever being converted to Marla at all, which is exactly why a buyer comparing options across both cities needs a reliable converter rather than mental math.

From Plot Size to Building Cost: What Comes Next

Once you know the exact square footage of a plot, the next practical question for most families is what it will cost to build on it. Material requirements — bricks, cement bags, steel, and sand — scale directly with the covered area, so getting the Marla-to-square-feet conversion right at the start avoids compounding errors further down the line. We’ve covered that step by step in our guide to house construction costs in Pakistan, and you can run the numbers for your own plot size using the construction material calculator, which takes covered area in square feet and estimates bricks, cement, and sand quantities.

Where These Conversions Matter in Practice

Beyond comparing listings, accurate unit conversion matters for a few concrete reasons. Property valuation tables used for stamp duty and registration — whether DC (District Collector) rates or FBR’s valuation tables — are generally published on a per-Marla or per-Kanal basis in Punjab and Islamabad, so an error in converting your plot size can throw off your estimated registration cost before you even visit the sub-registrar’s office. Housing society transfer and possession documents also state area in Marla or Kanal, and a mismatch between what’s written on your allotment letter and what a site survey shows is worth raising with the society before any payment is finalized. If you’re budgeting for a purchase, plan to build, our Marla, Kanal and square feet converter lets you move between all four common units — Marla, Kanal, square feet, and square yards — in a single step, so you can cross-check a listing instantly instead of doing the arithmetic by hand.

A Quick Worked Example

Say a Bahria Town file is advertised at “8 Marla” and a competing DHA Karachi listing is advertised at “320 square yards.” Converting both to square feet makes the comparison fair: 8 Marla × 272.25 sq ft = 2,178 sq ft, while 320 square yards × 9 sq ft = 2,880 sq ft. Despite sounding like similar mid-sized residential plots, the Karachi option is actually about 32% larger in covered land area — a difference that’s easy to miss when the units aren’t converted first, and one that directly affects both the price per square foot you’re really paying and how much you’ll eventually spend on construction material.

This article and the calculators referenced above are intended for general estimation and informational purposes only; always verify measurements, valuation rates, and documentation with your housing authority, a registered surveyor, or a qualified property lawyer before making a purchase decision. See our disclaimer for more details.